Magnetic Tube:
Tube magnet is the main part of grid magnets like trap magnets and grate magnets. Magnetic tubes are effectively used to separate ferrous wastages and filings non-sealing streams in dry and fluid products.
Magnetic tubes are made of 304 Stainless Steel and have two M8 holes at the ends to easily connect with different surfaces.
Trap Magnet:
Permanent trap magnets are used to provide magnetic protection at sensitive points of fluid process lines. In addition to preservation of product purity, magnetic traps also prevent damaging equipment by removing iron wastages.
Magnetic Plate:
Plate Magnets are designed for use in chutes. They are installed on the bottom side of a chute and provide maximum protection as product travels through the powerful magnetic field. Magnetic plates also can be used for suspension above conveyors, vibrating feeder, etc.
The magnetic field projects from the faces (poles) of the Plate Magnet reaching into the product stream and pulls the ferrous contaminants to the magnet faces. The magnetic field on a Plate Magnet is strongest at the poles and is about zero on other places of the plate.
plate magnets are produced with a standard size of 20×30 cm, but are available in other different sizes due to customers demands:
Magnetic Filter:
These magnets are to separate the waste iron ingredients from powders and tiny ingredients passing through ducts (pipes). Powder materials pass the filter through input and output flanges and a conic magnet separates the waste iron.
User industries:
Magnetic Sweep:
Sweep Magnets are used for cleaning filings and chips in workshops and factories.
User industries:
Smithy,
Magnetic Pulley:
Pulley magnets are installed as rollers at two ends of the conveyor belt. Magnetic pulleys are made of permanent magnets and are used in order to separate the iron ingredients or ingredients containing some percentage of iron existing in the soil or sand.
User industries:
Guaranty: The device comes with 2 years guaranty of magnetic intensity.
Magnetic Roll :
Roll magnets are made of the most powerful permanent magnets and have too much intenser magnetic field than drum separators (up to 14000 gausses). These rolls are used for severing light iron cutie minerals and tiny ingredients between 3 to 30 millimeters. Roll magnet production capacity varies from 1.5 to 30 tones and differ due to customers need, or input sizes and specifications.
Magnetic roll are manufactured in two models of single and double as below:
(Diameter × Length)
1- 100×1000
2- 100×1200
3- 100×2000
User industries:
Industrial Metal Detector:
The systems, known as metal detector are used for separating metals and alloys which contain no iron in chemical structure and do not absorb by magnets.
These systems are used in:
Automatic permanent over-band separator:
Automatic permanent over-band separators, equipped by ferrite magnets are used in industries which envisage much flow of iron wastage inputs. A set of mobile belt conveyor that covers around the separator is used in these systems that is able to separate and excrete iron ingredients outside of conveyor elt.
User industries:
Manual Permanent Over-Band Separator:
These sets are equipped by permanent magnets and do not require any source of energy (electricity or battery). They are used at most of industries which use conveyors such as: sand and gravel, combine sand, brick, tile and etc.
manual permanent over-band separators are installed suspended above the main conveyor belt or entry of crusher and absorbs iron wastages and alloys up to 30 kilograms.
Guarantee: the magnetic field intensity comes with a 7-years guarantee.
